Why Choose Steel Conveyor Cord Belts?
Apr. 19, 2021
As conveyor systems get longer, and handle increased volumes and tonnage, the belt itself needs to get stronger. Steel cable delivers higher strength, and decreased elongation compared to fabric; and steel cord belts deliver cheaper and more reliable performance for any system with long conveying distances or high lifts.
Applications of steel cord belts
Steel cord belts are in widespread use in the mining industry. They are used primarily for long-distance conveyors, heavy mining machinery (rotary disc excavators, overburden conveyor gantries, tractor shovels, bucket-chain excavators, stackers, spreaders, loaders, etc.), short- and middle-distance belt conveyors in surface mining and in general wherever high conveying capacities and small takeups are required. In this connection, two important properties of a steel cord conveyor belt compared to a fabric ply conveyor belt are critical: high nominal breaking strengths with low reference elongations.
Benefits of steel cord belts
Long Life Expectancy
Steel cord conveyor belts can be supplied with a thinner carcass and thicker cover rubber for the same rating as an equivalent fabric belt; which increases the belt life. The carcass also has a greater life than an equivalent fabric carcass.
When the belt operating tension has to be higher than 2500 KN/m, belts reinforced with steel cord are the only alternative; and there are steel cord belts designed for ratings up to 10000 KN/m. Steel cord belts are also an economic alternative to fabric belts with ratings between 1000 KN/m and 2500 KN/m.
The elongation of a material depends on its elastic modulus; and the superior elastic modulus of steel cord; elongation can be less than 0.25%; which allows for smaller takeup lengths.
Long Centre Distances
Steel cable has much lower elongation than fabrics, and this, in addition to the strength, lets belts be designed with long distances between pulleys; and takeups and transfer points are less constraining.
Smaller Pulley Diameters
With a much thinner carcass than a fabric belt of the equivalent rating, steel cord belts can be run on pulleys with smaller diameters, which leads to energy savings. The superior dynamic modulus of steel over fabric means that fatigue is much less.
High Impact Resistance
Typically, steel cord belt design leads to a greater proportion of rubber in the whole belt compared to textile conveyor belts. Additional rubber means that impact energy is better absorbed by the belt; making steel cord belts a good choice for any application where there can be sudden heavy individual pieces.
Even the highest rated steel cord belts trough perfectly on deep troughed idler sites. This ensures easy belt training, and gives the belt a larger effective capacity; allowing the user to either increase throughput, or use a narrower belt.
Splice Life and Strength
Properly provided belt splices can last as long as the Belt itself. They can also achieve spliced strength equivalent to almost 100% of the strength of the Belt.
Steel cord belts can be repaired with hot or cold vulcanization and the damaged edges can be restored to their original width by hot repair. Worn out covers can be replaced with fresh rubber, durable enough to completely rejuvenate the belt, delivering even greater economy for the customer.
If the conveyor belt is weak or stiff, the conveyor system will not work properly. In order to make the system work easily, you need to choose the right belt. With so many choices, how will you choose the right belt for your system? Her...